- The Combi-Clamp
Skirting Clamp is the ultimate seal for loading
points.
- Combi-Clamp skirting clamps
are made using steel plate, contoured steel
castings, and a heavy duty stainless steel clamp
assembly that provides years of trouble free
service.
-
- Combi-Clamp Skirting
Clamps solve problems.
- Many skirting devices create
more problems than they solve. Some are too
flimsy, some work for a few weeks until the parts
rust together, and still others force skirting
into the belt causing deep gouging or grooves in
the expensive conveyor belt.
-
- The Combi-Clamp is designed
with a curved clamping plate.This puts skirting
on a similar angle to the belt maintaining a
tight, positive seal, without allowing the
skirting to groove the belt. Combi-Clamp Skirting
Clamps are also available with straight clamping
plates where the application warrants. Easily
adjustable for varying skirtboard heights and
thickness, the Combi-Clamp can accommodate
skirting from ˝" to 1" thick and up to
12" wide.
-
|
|
- Installation is easy.
- Each clamping unit is 23"
wide and can be installed by welding or bolting
in place. Individual units can be butted together
or spaced apart to fit the needs of your
application.
-
- Combi-Skirt Skirting
Rubber Last longer.
- Highly quality Richwood
Combi-Skirting rubber is recommended with the
Combi-Clamp system. Its hardness is slightly less
than your conveyor belt. It will last up to 10
times longer than standard skirting rubber. You
can buy less expensive skirting rubber, (rubber
that is filled with clay, etc, to make it less
expensive) but it will cost you more in the long
run. When put in contact with the belt, cheap
skirting rubber will damage your belting and does
not contain spillage.
|
